Orbit Winch Self-Tailing alu noir - Taille 20
Réf. RA6201
Orbit Winch Self-Tailing alu noir - Taille 20
Réf. RA6201
Description
NO TOOLS REQUIRED
Full disassembly and reassembly can conveniently be performed without the need for any tools. To remove the drum, pull back the spring-loaded release latch and a slight anti-clockwise rotation will allow the self-tailing arm to be lifte
Full disassembly and reassembly can conveniently be performed without the need for any tools. To remove the drum, pull back the spring-loaded release latch and a slight anti-clockwise rotation will allow the self-tailing arm to be lifte
Features
Sprung self-tailing jaws to accept 6 - 10mm line.
Proven Andersen winch gearing configuration.
Power Rib™ ensures a controlled grip on the line at all times, whether trimming or easing. Minimal rope wear compared to more abrasive drum surface finishes.
No tools required for configuration and servicing.
Machined aluminium drum – stronger and lighter than traditional cast aluminium drums.
Aluminium centre stem, lighter weight compared to bronze stems.
Low line entry due to gearing configuration geometry.
Proven Andersen winch gearing configuration.
Power Rib™ ensures a controlled grip on the line at all times, whether trimming or easing. Minimal rope wear compared to more abrasive drum surface finishes.
No tools required for configuration and servicing.
Machined aluminium drum – stronger and lighter than traditional cast aluminium drums.
Aluminium centre stem, lighter weight compared to bronze stems.
Low line entry due to gearing configuration geometry.
Applications
Genoa Sheets
Spinnaker Sheets
Main Sheets
Genoa Halyards
Spinnaker Halyards
Main Halyards
Reef Lines
Spinnaker Sheets
Main Sheets
Genoa Halyards
Spinnaker Halyards
Main Halyards
Reef Lines
Informations techniques
- Matériaux Hard anodised aluminium drum, Grade 316 stainless steel shaft and pawls, Grade 2205 stainless steel axle pins, Aluminium bronze gears, Glass-filled nylon self tailer,Self-lubricating acetal bearings
- Poids (kg) 1.7
- Type de roulement Ball Bearing
- B (mm) 120
- Diamètre du tambour (D) (mm) 75
- H (mm) 124
- Entrée de corde (l) (mm) 42
Légende
Charge de travail indiquée pour une application nautique.
Charge Maximale d'Utilisation (CMU) : uniquement pour les applications industrielles comme le levage.
Le facteur de sécurité choisi est de 5 par rapport à la charge de rupture.
CMU = Charge de rupture / 5
