Soft Padeye Alu - DM - Dia 8 mm
Part #DM08ALS
Soft Padeye Alu - DM - Dia 8 mm
Part #DM08ALS
Description
Our TyeTec® DM mast padeyes can be mounted from the outside of the mast into a pre-bored hole, providing strong lightweight attachments for backstays, temporary forestays, downhauls,
sheet attachments, preventers, etc.
TyeTec® mast padeyes are delivered with two plastic washers of different thicknesses to adjust the padeye to different mast materials. The washers can be easily adjusted to the mast radius. Just place a sheet of sandpaper on the mast and slide the washer over the sandpaper until the radius fits.
The minimum and maximum mast thickness are: 2 and 10 mm
sheet attachments, preventers, etc.
TyeTec® mast padeyes are delivered with two plastic washers of different thicknesses to adjust the padeye to different mast materials. The washers can be easily adjusted to the mast radius. Just place a sheet of sandpaper on the mast and slide the washer over the sandpaper until the radius fits.
The minimum and maximum mast thickness are: 2 and 10 mm
Applications
Rigging fastening
Technical information
- Working load (kg) 1500
- Weight (g) 16
- A (mm) 8
- B (mm) 18
- C (mm) 30
Caption
Working load (WL) : for nautical applications
Working Load Limit (WLL): for industrial applications only.
The safety factor is 5 times the breaking load.
WLL = Breaking load / 5